Using media gateway 1000b (p. 88), Using media gateway 1000b – Nortel Networks NN43110-101 User Manual
Page 88
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Additional phone features
Table 4: Troubleshooting Virtual Office (Part 3 of 3)
Displayed Message
Probable Cause
Actions
Permission Denied
(6)
Incorrect User ID
entered.
Enter correct User ID.
Incorrect Station
Control Password
entered.
Select Retry, and try
again with the correct
Station Control
Password.
Server Unreachable
(1)
Network problem.
Notify system
administrator if the
problem persists.
Server Unreachable
(2)
Network problem.
Notify system
administrator if the
problem persists.
Using Media Gateway 1000B
The Media Gateway 1000B (MG 1000B) provides a means of extending
CS 1000 Release 4.5 features to one or more remotely located branch
offices using the Branch Office feature. A branch office is a remote
location in the network where IP Phones, PSTN access, and TDM
telephones are located. Contact your system administrator to see if these
functions are available for your use.
The Media Gateway 1000B (MG 1000B) telephone can operate in Normal
or Local Mode.
Normal Mode
The telephone registers with the Main Office and receives telephone
services from the Main Office. At any time during Normal Mode, you can
check Local Mode functionality (make and receive calls) by enabling
Local Mode and returning to Normal Mode. After testing, you can return to
Normal Mode (see “Using Resume Normal Mode” on page 89) or by
waiting for 10 minutes.