Nortel Networks NN43110-101 - Manual (Page 52)

While on an active call
If the transferred call is not answered, your telephone rings:
1. Lift the handset to reconnect to the
original caller.
Trans
(Goodbye)
2. Choose one of the following:
— Press the Transfer context-sensitive
soft key and repeat the transfer.
— If the transfer is picked up while you
are on the line, press the Goodbye
key to complete the transfer.
Using Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call
from any telephone. Using Call Park does not tie up a line. When
configured network-wide, Call Park can be used across networks. A
System Park extension can be configured to automatically park most
calls.
To park a call on the System Park DN or your own DN:
During an active call, press the Park
context-sensitive soft key twice.
Park Park Note: By default, the call is parked on
] your DN unless a System Park DN is
enabled to automatically park calls on
the system.