ClearOne AP400 - Manual (Page 62)

Appendices ~ Appendix E: Serial Commands 58
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
OUTPUTMIX=hex word The selected input will be routed to
the outputs indicated.
OUTPUTMIX=null Mix Command to return the current
setting for the input.
Note:
When entering the hex value of the , it is
not necessary to add the leading zeros, only zeros that follow
the value, as in examples 1 & 2, below.
Example 1
The following command routes Pregate Mic Input 1 audio to
Output 1. This command applies only to the box the serial cable
connects to, since a device is not specified.
Example 1. OUTPUTMIX matrix
#34 MTRX 18 1
Example 2
The following command routes Mic Input 1 Post Gate audio to
Outputs A, B, and C, and to the G-Link X-bus.
Example 2. OUTPUTMIX matrix
MTRX 1 4700
Return Values
The command will return the updated condition of the matrix for the
selected input in the same format as the command was issued.