ClearOne AP400 - Manual (Page 33)

29
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Installation ~ LCD Programming
Meter parameters
There are five main submenus under the Meter menu tree (Figure 2.24).
Inputs, Outputs, ERL/TERL, and ERLE/TERLE
The first four submenus are all handled in the same way. Using the LCD, press the
Meter button, then scroll through the options (inputs, outputs, ERL/TERL and
ERLE/TERLE) to specify which is to be metered by the front-panel LED meter.
When the appropriate option is visible, press Enter to begin monitoring its status on
the front-panel LED.
Default Meter
The default meter parameter determines what is being displayed on the LED meter
when a parameter is not using the LED bar graph, and the AP400 times out (see
Timeout, page 22).
Figure 2.24. Meter parameters