ClearOne AP400 - Manual (Page 50)

Appendices ~ Appendix E: Serial Commands 46
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Serial Command Parameters and
Explanations
For serial port command protocol and syntax, see page 43.
AA
This command activates and deactivates the auto answer
feature.
[DEVICE] AA
Explanation
X=0 Parameter disables auto-answer
X=1 Parameter enables auto-answer
X=2 Parameter to toggle the state from one state
to the other (regardless of current state)
X=Null Parameter to report back the current state
Return Values
The command will return the updated condition (On=1, Off=0)
of the auto answer in the same format as the command.
AAMB
This command changes or reports back the state of the
adaptive ambient for a microphone.
[DEVICE] AAMB
Explanation
CH= 1-4 Parameter to apply to the specified
microphone channel
CH= * Parameter to apply command to all
microphone channels
X=0 Parameter to set the state to OFF
X=1 Parameter to set the state to ON
X=Null Parameter to return the current state
Return Values
The command will return the updated condition (On=1, Off=0)
of the adaptive ambient in the same format as the command.