YSI IQ SensorNet FDO Sensor User Manual
Page 15
FDO
®
70x IQ ...
Commissioning
ba76014e03
05/2014
3 - 3
3.3
Commissioning / Getting the instrument ready for
measuring
Identification in the
IQ
S
ENSOR
N
ET
Both the sensor cap and sensor basis (sensor without cap) have a
series number of their own. The sensor has to be equipped with a sen-
sor cap for a successful login to the IQ
S
ENSOR
N
ET
. The operable sen-
sor is displayed as follows in the list of sensors:
Commissioning steps
Model:
Model designation of the sensor cap
(="SC FDO 70x")
Ser. no.:
Series number of the sensor cap
Sensor name:
The series number of the sensor basis is preset
here. You can change this entry as necessary by
entering a user-defined name.
1
Pull the protective cap off the sensor.
2
If required, assign a user-defined name to the sensor (see rel-
evant IQ
S
ENSOR
N
ET
system operating manual).
3
When using IQ
S
ENSOR
N
ET
without automatic air
pressure compensation the mean air pressure value or the
location altitude has to be entered (for more detailed informa-
tion see the relevant IQ
S
ENSOR
N
ET
system operating man-
ual).
4
Set the sensor (see section
3.4).