Compaq AA-RHGWB-TE - Manual (Page 8)

8.7.2.1 Cabling the DLT MiniLibraries . . .. . .. . .. . .. . . .. . .. . .. . .. . 8–24
8.7.2.2 Configuring a Base Module as a Slave .. . .. . . .. . .. . .. . .. . 8–26
8.7.2.3 Powering Up the DLT MiniLibrary . .. . .. . .. . . .. . .. . .. . .. . 8–28
8.7.2.4 Setting the TL890/TL891/TL892 SCSI ID . . . .. . .. . .. . .. . 8–28
8.8 Preparing the TL894 DLT Automated Tape Library for Shared
SCSI Bus Usage . .. . .. . .. . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–30
8.8.1 TL894 Robotic Controller Required Firmware . . .. . .. . .. . .. . 8–30
8.8.2 Setting TL894 Robotics Controller and Tape Drive SCSI
IDs . . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–30
8.8.3 TL894 Tape Library Internal Cabling . . .. . .. . .. . . .. . .. . .. . .. . 8–33
8.8.4 Connecting the TL894 Tape Library to the Shared SCSI
Bus . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–34
8.9 Preparing the TL895 DLT Automated Tape Library for Shared
SCSI Bus Usage . .. . .. . .. . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–36
8.9.1 TL895 Robotic Controller Required Firmware . . .. . .. . .. . .. . 8–37
8.9.2 Setting the TL895 Tape Library SCSI IDs .. . .. . . .. . .. . .. . .. . 8–37
8.9.3 TL895 Tape Library Internal Cabling . . .. . .. . .. . . .. . .. . .. . .. . 8–38
8.9.4 Upgrading a TL895 . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. . 8–40
8.9.5 Connecting the TL895 Tape Library to the Shared SCSI
Bus . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–40
8.10 Preparing the TL893 and TL896 Automated Tape Libraries
for Shared SCSI Bus Usage .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–40
8.10.1 Communications with the Host Computer .. . .. . . .. . .. . .. . .. . 8–42
8.10.2 MUC Switch Functions .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. . 8–42
8.10.3 Setting the MUC SCSI ID .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. . 8–43
8.10.4 Tape Drive SCSI IDs . . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. . 8–43
8.10.5 TL893 and TL896 Automated Tape Library Internal
Cabling .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–44
8.10.6 Connecting the TL893 and TL896 Automated Tape
Libraries to the Shared SCSI Bus .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–47
8.11 Preparing the TL881 and TL891 DLT MiniLibraries for
Shared Bus Usage . .. . .. . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–48
8.11.1 TL881 and TL891 DLT MiniLibraries Overview .. . .. . .. . .. . 8–48
8.11.1.1 TL881 and TL891 DLT MiniLibrary Tabletop Model . . 8–49
8.11.1.2 TL881 and TL891 MiniLibrary Rackmount
Components . .. . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–49
8.11.1.3 TL881 and TL891 Rackmount Scalability . . . .. . .. . .. . .. . 8–50
8.11.1.4 DLT MiniLibrary Part Numbers . .. . .. . .. . .. . . .. . .. . .. . .. . 8–51
8.11.2 Preparing a TL881 or TL891 MiniLibrary for Shared SCSI
Bus Use . . .. . . .. . .. . .. . .. . . .. . .. . .. . .. . .. . . .. . .. . .. . .. . . .. . .. . .. . .. .
8–52
8.11.2.1 Preparing a Tabletop Model or Base Unit for
Standalone Shared SCSI Bus Usage . . .. . .. . . .. . .. . .. . .. .
8–52
viii Contents