Compaq AA-RHGWB-TE - Manual (Page 124)

Figure 6–8: A Simple Zoned Configuration
KGPSA KGPSA
RA8000/
ESA12000
HSG80 HSG80
RA8000/
ESA12000
HSG80 HSG80
KGPSA KGPSA
DSGGA SWITCH
Cluster 1
Member
System 1 Cluster 1
Member
System 2 Cluster 2
Member
System 2 Cluster 2
Member
System 1
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
ZK-1709U-AI
______________________ Note _______________________
Only static zoning is supported; zones can only be changed when
all connected systems are shut down.
For information on setting up zoning, refer to the SAN Switch Zoning
documentation that is provided with the switch.
6.4.2 Cascaded Switches
Multiple switches may be connected to each other. When cascading switches,
a maximum of three switches is supported, with a maximum of two hops
between switches. The maximum hop length is 10 km longwave single-mode
or 500 meters shortwave multimode Fibre Channel cable.
6–14 Using Fibre Channel Storage