Compaq AA-RHGWB-TE - Manual (Page 306)

TL892 , 8–20, 8–24
TL893 , 8–47
TL894 , 8–34
TL895 , 8–40
TL896 , 8–47
TZ885 , 8–13
TZ887 , 8–16
TZ88N-TA , 8–4
TZ88N-VA , 8–3
changing HSG80 failover modes , 6–55
cluster
expanding , 3–7, 9–6
increasing availability , 4–3
planning , 4–2
cluster interconnects
increasing availability , 4–2
clusterwide file systems
allocating a disk for , 1–4
command
atmconfig , 7–4
CONFIGURATION RESTORE ,
6–33
emxmgr , 6–59
emxmgr -d , 6–59
emxmgr -m , 6–59
emxmgr -t , 6–60
init , 6–24, 6–45, 6–48, 6–50
SAVE_CONFIGURATION , 6–33
set bootdef_dev , 6–48, 6–50
SET FAILOVER COPY =
THIS_CONTROLLER , 1–14
SET MULTIBUS_FAILOVER
COPY = THIS_CONTROLLER ,
3–18
show config , 4–9t, 10–5t, 10–7t
show device , 4–9t, 10–5t, 10–7t
SHOW THIS_CONTROLLER ,
6–31
wwidmgr , 6–40
wwidmgr -clear , 6–41
wwidmgr -quickset , 6–42
wwidmgr -show , 6–24, 6–42, 6–45
Compaq 20/40 GB DLT Tape Drive ,
8–9
cabling , 8–10
capacity , 8–9
cartridges , 8–9
connectors , 8–9
setting SCSI ID , 8–9
configuration
restrictions , 2–5
CONFIGURATION RESTORE
command , 6–33
configuring base unit as slave , 8–26,
8–61
connections to HSG80 , 6–55
connectors
supported , 2–11
console variable
bus_probe_algorithm , 2–6
D
data path
for buses , 3–5
default SCSI IDs
ESL9326D , 8–66
TL881/TL891 , 8–53
TL890 , 8–29
TL891 , 8–29
TL892 , 8–29
TL893 , 8–43
TL894 , 8–30
TL895 , 8–37
TL896 , 8–44
device name , 6–40
device unit number , 6–40
setting , 6–41
diagnostics
Memory Channel , 5–12
differential SCSI buses
description of , 3–4
differential transmission
definition , 3–4
disk devices
restrictions , 2–7
setting up , 3–16, 9–14
disk placement
Index–2