Viconics VWG-50 (Classic ZigBee) Design Consideration and Setup Guide - Manual (Page 5)

5 | VWG-50-Setup Guide
 Compatible VT7200 Series zone wireless controllers are identified with wireless
module 051-0083 Rx
 Compatible VT7300 Series FCU wireless controllers are identified with wireless
module 051-0083 Rx
 Compatible VT7600 Series staging wireless controllers are identified with
wireless module 051-0083 Rx
 Compatible VTR7300 Series FCU wireless controllers are identified with
wireless module 051-0083 Rx
 Compatible VZ7200 Series zone wireless controllers are identified with wireless
module 051-0070 Rx
 Compatible VZ7260 Series zone wireless controllers are identified with wireless
module 051-0089 Rx
 Compatible VZ7656B RTU wireless controller is identified with wireless module
051-0071 Rx
 Compatible VZ7656R/H/F/E Series RTU wireless controllers are identified with
wireless module 051-0087 Rx
Compatibility Overview
Controller wireless communication adapter revision(s)
Jace Driver firmware(s)
Release 1
Current VT72 / 73
051-0021 Rx
Release 1
Current VT76
051-0022 Rx
New Release 2
VT(R)72 / 73 / 76
051-0083 Rx
New Release 2
VZ72xxX
051-0070 Rx
051-0089 Rx
Release 1 VWG-40
Release 2 VWG-50
Exception to the new
VTR73xx FCU Controllers
Important Note
The Release 2 wireless
controllers are fully compatible to
the Release 1 VWG-40 versions.
This means that if replacement
controller parts are required on a
Release 1 installation, Release 2
controllers are compatible.
Release 2 VTR7300 FCU
controllers & Zoning products
VZ72xxX / VZ76xxX are NOT
compatible to Release 1 VWG-
40 versions installations.
Release 1 VWG-40 versions
installations CANNOT be
updated to the new Release 2
VWG-50 versions as the
controllers are NOT compatible.
New Release 2
VZ76xxX
051-0071 Rx
051-0087 Rx