Viconics VWG-50 (Classic ZigBee) Design Consideration and Setup Guide - Manual (Page 2)

2 | VWG-50-Setup Guide
D
ISCLAIMERS
NO WARRANTY. Viconics, Inc. (herein after referred to as “Viconics”) makes no warranty
as to the accuracy of or use of this technical documentation. Any use of the technical
documentation or the information contained therein is solely at the risk of the user.
Documentation may include technical or other inaccuracies or typographical errors.
Viconics reserves the right to make changes to this document without prior notice, and the
reader should in all cases consult Viconics to determine whether any such changes have
been made. The information in this publication does not represent a commitment on the
part of Viconics.
Viconics shall not be liable for incidental or consequential damages resulting from the
furnishing, performance, or use of this material.
This guide contains links and references to third-party websites that are not under the
control of Viconics, and Viconics is not responsible for the content of any reference
material or linked websites. If you access a third party website mentioned in this guide,
then you do so at your own risk. Viconics provides these links only as a convenience, and
the inclusion of the link does not imply that Viconics endorses or accepts any
responsibility for the content on those third-party sites.
Electronic controls are static sensitive devices. Discharge yourself properly before
manipulation and installing the Viconics wireless gateway.
All Viconics wireless gateways and related wireless controllers are to be used only as
operating controls. Whenever a control failure could lead to personal injury and or loss of
property, it becomes the responsibility of the user to add safety devices and or alarm
system to protect against such catastrophic failures.
All VT7000 series wireless controllers and associated VWG (Viconics Wireless Gateway)
have been rigorously tested to ensure reliable operation in most building applications using
the latest 2.4 Zigbee™ ™™ technologies. Viconics cannot guarantee against potential
network interference should additional wireless systems be deployed sharing close
proximity.
Best practices covered in this manual and all related Viconics VWG documents should be
considered as a guide to apply Viconics Wireless Network devices only. The instructions
included in this manual are based upon Viconics in house testing and should be referred to
as a guide only.
Viconics Inc. may not be held liable for continued reliable, or robust operation of any and
all wireless based devices. Although Viconics has taken many precautions in assuring the
robustness of the VT7000 series wireless controller product line and associated network
access point (VWG-50-XXXX-1000) Please note; future application of additional wireless
devices utilizing the same or similar channels and / or frequencies may degrade
performance of overall system and / or reliability.
Non-approved modifications or changes made to the VWG or wireless controllers may void
the FCC compliance of the VWG and wireless controllers.