Viconics VWG-50 (Classic ZigBee) Design Consideration and Setup Guide - Manual (Page 30)

30 | VWG-50-Setup Guide
General TCP/IP Configuration
Hostname. Is the local hostname exposed on the network. Please do not change and
leave to “Localhost”
DNS Domain. The TCP/IP Domain Name System (DNS) domain this host belongs to.
Only if DNS is used.
IPv4 Gateway. The IP address for the device that forwards packets to other networks or
subnets.
DNSv4 Servers. The IP address for one or more DNS servers, each of which can
automate associations between hostnames and IP addresses. Included are icon-buttons
to Add (to enter IP address of server), delete and move Up/Down (to set the DNS search
order).
 Interface 1. Set’s the local device IP settings for NET1
 Interface 2, Set’s the local device IP settings for NET2
The interface selected for BACnet IP communication is made at the “BACnet Network” tab
under BACnet IP Settings. The default connection used is NET1
Selectable fields are as follows:
ID. A read-only OS identifier for the hardware interface).
Description. A read-only text string such as “Ethernet Adapter”.
Adapter Enabled. Read-only checkbox that indicates whether the Ethernet port is usable.