Viconics VWG-50 (Classic ZigBee) Design Consideration and Setup Guide - Manual (Page 10)

10 | VWG-50-Setup Guide
Premises:
 Building A is first stated.
 Yellow device / node / controller have given out its 6 addresses to other devices
in building A.
 Building B devices / nodes / controllers can only be connected through blue
device / nodes / controller due to maximum distance coverage.
Result:
 Orange devices / nodes / controllers cannot join the Zigbee™ network.
Workaround to get orphan devices on the network:
 Disconnect & bring one of building B device / node / controller & power it up in
building A until it joins the Zigbee™ network ( confirmed either at the VWG –
coordinator or using the status LED on the wireless communication card of the
device / node / controller.
 When the device / node / controller has joined the network in building A and is
added to the Niagara database, bring it back into building B so it can propagate
Zigbee™ addresses to the other devices in building B.