Viconics VWG-50 (Classic ZigBee) Design Consideration and Setup Guide - Manual (Page 23)

23 | VWG-50-Setup Guide
BACnet IP Settings
 BACnet Adapter. This selects which of the 2 IP network connections is to be
used for BACnet IP communication. Net1 or Net2. The default is set to Net 1.
 UDP Port. Is the default BACnet UDP port number assigned to the device if the
VWG for BACnet IP communication. The default port for BACnet communication
port used is: 47808 (0xBAC0). Do not change this value
 Bbmd Address. The BACnet IP Address of the BBMD this foreign device should
register with.
Note: A BACnet IP Address requires the HTTP port number of the remote
device (i.e. 192.168.100.120:47808 where 192.168.100.120 is the TCP/IP
address and 47808 is the HTTP port used when redistributing broadcast
messages).
 Registration Lifetime. Is the duration of registration with the selected BBMD.
The device will re-register itself periodically before this time expires. Default
value is 15 minutes.
Make sure to click “Enable” after entering the proper settings.