Viconics VWA5000 (Classic ZigBee) Installation Guide - Manual (Page 5)

5 | VWA 5000 Series-Installation Guide
M
ODEL
C
HART
VICONICS PART NUMBER VWA5000W5000W VWA5000D5000W
Complete with magnet,
batteries and required
mounting hardware
Wireless Window Switch
(Patio and balcony doors)
Wireless Door Switch
To verify if the device is a wireless window switch or wireless door switch:
- Power cycle the switch (remove battery for 60 seconds and then insert again) and verify
the LED blinking pattern to confirm if it is a window switch or door switch or simply read
the label located on the electronic board.
# of blinks Part Number
2 blinks Window Switch (VWA5000W5000W)
3 blinks Door Switch (VWA5000D5000W)
WARNING: Respect polarity when replacing batteries. Failure to do so may
damage the switch. The
“+” and “-” terminals are illustrated on the board.
Remove pull tab to power up the switch.
Fig.4
– Wireless Switch Components
NOTE: The magnet is located on the opposite side of the security screw.
(Opposite side of the batteries).
Hidden Switch
LED (switch side)
Pull Tab