Viconics VWA5000 (Classic ZigBee) Installation Guide - Manual (Page 3)

3 | VWA 5000 Series-Installation Guide
L
OCATION
1. The switch unit should never be installed on a moving part (door or window).
2. Only the magnet unit should be installed on a moving part (door or window).
3. Should not be affected by direct sun radiation. It may affect the color over a long
period of time.
4. Ensure that the minimum distance between any Viconics wireless node and any
Wi-Fi devices ( wireless routers, wireless adapters, lap-tops using wireless
netwo
rks, etc….) to be at least 3 feet (1 M) and preferably 10 feet (3 M) or more.
(Fig. 3).
Fig. 3
– Minimum distance from Wi-Fi devices.
 Electronic controls are static sensitive devices. Discharge yourself
properly before manipulating and installing the device.
 A short circuit or wrong wiring may permanently damage the Terminal
Equipment Controller or the equipment.
 All VWA 5000 series controls are designed for use as operating controls
only and are not safety devices. These instruments have undergone
rigorous tests and verification prior to shipping to ensure proper and
reliable operation in the field. Whenever a control failure could lead to
personal injury and or loss of property, it becomes the responsibility of
the user, installer, electrical system designer to incorporate safety
devices (su
ch as relays, flow switch, thermal protections, etc…), or an
alarm system to protect the entire system against such catastrophic
failures. Tampering with the devices or unintended application of the
devices will result in a void of warranty.
 Please see the specifications page for operating and storage conditions.
Note that any occurring condensation can damage the wireless switch.
 Please respect polarity when replacing batteries, reversing the polarity of
the batteries can damage the wireless switch.