Viconics VWA5000 (Classic ZigBee) Installation Guide - Manual (Page 15)

15 | VWA 5000 Series-Installation Guide
S
PECIFICATIONS
Power requirements: 3.0 VDC 2 x AAA batteries. Factory
supplied
Operating conditions: 0 °C to 50 °C ( 32 °F to 122 °F )
0% to 95% R.H. non-condensing
Storage conditions: -30 °C to 65 °C ( -22 °F to 122 °F )
0% to 95% R.H. non-condensing
Agency Approvals all models CE: RTTE 1999/5/EC
Agency Approvals Wireless models FCC: Compliant to: Part 15, Subpart C
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT
Important Notice
All VWA5000W series devices are for use as operating controls
only and are not safety devices. These instruments have
undergone rigorous tests and verifications prior to shipment to
ensure proper and reliable operation in the field. Whenever a
control failure could lead to personal injury and or loss of property, it becomes the
responsibility of the user, installer, and or electrical system designer to incorporate
safety devices (such
as relays, flow switch, thermal protections, etc…) and or alarm
system to protect the entire system against such catastrophic failures. Tampering of
the devices or miss application of the device will void warranty.
Please check with your local government for instruction on disposal of this product