Viconics VT7300F-2572 Installation Manual - Manual (Page 8)

8 | PIR Ready VT7300-2572 Series
Screw terminal arrangement
Main outputs wiring
Wiring notes:
Note 1: Electromechanical contacts are to be used with the digital inputs. Electronic triacs
cannot be used as mean of switching for the input. The switched leg to the input for
the input to activate is terminal C (common).
Note 2: The transformer of the unit provides power to the t Terminal Equipment Controller
and the additional loads that will be wired to the Terminal Equipment Controller.
AO2 AO1 BI1 RS
Scom
BI2 UI3
Fan H Fan M Fan L 24V~Hot BO5 BO5
5 pole left top connector 3 pole left top connector
8 pole bottom connector
24V-Com