Viconics VT7300F-2572 Installation Manual - Manual (Page 24)

24 | PIR Ready VT7300-2572 Series
Med AO2
Default value: 6.0 V
The middle speed AO2 fan output value when the fan is
enabled.
This value is used only if the fan mode is set to Med.
4.1 to 7.0 V
High AO2
Default value: 8.6 V
The maximum AO2 fan output value when the fan is enabled.
This value is used if the fan mode is set to High and as a
maximum output if the fan output is set to auto.
7.1 to 10.0 V
UI3 dis
Display UI3 value.
Used as diagnostic / service help to troubleshoot and diagnose
sensor operation
Supply or change over temperature when UI3 is configured as
an analog input
( SS or COS )