Viconics VT7300F-2572 Installation Manual - Manual (Page 12)

12 | PIR Ready VT7300-2572 Series
Three status LED’s on the Terminal Equipment Controller cover are used to indicate the
status of the fan (any speed), a call for heat, or a call for cooling.
Fan coil models
When the fan is ON, the FAN LED will illuminate
When heating & reheat is ON, the HEAT LED will illuminate
When cooling is ON, the COOL LED will illuminate
U
SER
I
NTERFACE
Unoccupied mode override
An Override can be made on commercial models during an unoccupied period. If the
Override option is enabled in the lockout configuration, pressing the middle override
button will resume occupied setpoints for a time specified by the parameter “ToccTime”.