beautypg.com

Viconics VT7607 BACnet Integration Guide (First Release 1000 Series) User Manual

Page 8

background image

8

2. User programming instructions menu

The VT7600 series of thermostat feature an intuitive, menu-driven, backlit LCD display that walks users through the
programming steps, making the programming process extremely simple. This menu is typically accessed by the user to set the
parameters such as temperature and time events, system mode, fan mode, etc.

It is possible to bring up the user menu at any time by depressing the MENU key. The status display automatically resumes
after exiting the user-programming menu.

If the user pauses at any given time during programming, Auto Help text is displayed to help and guide the user through the
usage and programming of the thermostat.


Ex.:

Press yes key to change cooling temperature setpoint
Use the up or down arrow to adjust cooling setpoint

Each of the sections in the menu are accessed and programmed using 5 keys on the thermostat cover.
The priority for the alarms is as follows:




The YES key is used to confirm a selection, to move onto the next menu item and to manually scroll through the
displayed information.



The NO key is used when you do not desire a parameter change, and to advance to the next menu item. Can
also be used to toggle between heating and cooling setpoints.



The MENU key is used to access the Main User Menu or exit the menu.



The down arrow key is used to decrease temperature setpoint and to adjust the desired values when
programming and configuring the thermostat.



The up arrow key is used to increase temperature setpoint and to adjust the desired values when programming
and configuring the thermostat.

When left unattended for 45 seconds, the display will resume automatic status display scrolling.
To turn on the backlit, press any key on the front panel. The backlit display will turn off when the thermostat is left unattended
for 45 seconds

Sequence of user menu:

Override

Resume

Temperature

setpoints

Humidity

setpoints

System mode

setting

Fan mode

setting

Schedules

setting

Clock

setting

Schedule

hold

Override
schd Y/N

Temperat
set Y/N

Humidity
set Y/N

Sys mode
set Y/N

Fan mode
set Y/N

Schedule
set Y/N

Clock
set Y/N

Schedule
hold Y/N

Appears only in
unoccupied mode

Appears only on

stand-alone models

Cancel
ovrd Y/N

Appears only in
override mode


There is a default profile set in the thermostat from the factory.
This enables the thermostat to operate as a non-programmable unit in day mode operation at start up.

Programmed default temperature and humidity setpoints:

Programmed default modes:

Occupied cooling setpoint = 24 °C ( 75 °F )

System mode = Auto

Occupied heating setpoint = 22 °C ( 72 °F )

Unoccupied cooling setpoint = 28 °C ( 82 °F )

Fan mode = Smart (for models with a communication module or

programmable stand-alone models)

Fan mode = Auto (for non-programmable stand-alone models)

Unoccupied heating setpoint = 18 °C ( 65 °F )

Programmed default schedules:

Dehumidification setpoint = 70% RH

Monday through Sunday

Humidification setpoint = 50% RH

Occupied time is: 12 00 AM

Fahrenheit scale

Unoccupied time is: 11:59 PM

Setpoint type = permanent

Unoccupied time is: 11:59 PM


There will be a 1 minute unoccupied period every night at 11:59 PM with this default configuration.

This manual is related to the following products: