Viconics VT7607 BACnet Integration Guide (First Release 1000 Series) - Manual (Page 13)

13
I) Clock/Day Settings
Clock
set Y/N
This section of the menu permits the user to set the time and day.
Time setting Day setting Time format setting
Time
set? Y/N
No next →
Yes down ↓
Day
set? Y/N
No next →
Yes down ↓
12/24hrs
set? Y/N
No = exit
Yes down
↓
Time
0:00
Use ▲▼
To set value
Day
Monday
Use ▲▼
To set value
12/24hrs
12 hrs
Use ▲▼
To set value
J) Schedule hold
Schedule
hold Y/N
This menu
• This menu will only appear on stand-alone thermostat, e.i. without a BACnet / Echelon module.
• This section of the menu permits the user to set a permanent schedule hold, which bypasses the internal
thermostat scheduling.
• The permanent schedule hold function is typically used for non-scheduled events that extend for various periods
of time.
• Enabling a permanent occupied or permanent unoccupied schedule hold will cancel any active override.
• The use of temporary setpoints during permanent hold is permitted. The duration of the temporary setpoint is as
set per the TOccTime parameter. Ex. 3 hours
Use ▲▼ to set value, Yes key to confirm
Schedule
resume
Resume regular scheduling cancels the permanent hold and re-enables the regular
programming as set per internal scheduling or as per remote NSB via one of the DI’s
configured as remote NSB.
This action can also by accomplished by using the Resume menu.
Any temporary setpoint that are active will be left active for the duration of the period as set
per the TOccTime parameter.
Schedule
occ hold
Hold permanent occupied forces the thermostat into a permanent occupied mode using the
occupied setpoints. All timed scheduling functions are by-passed.
The PERMANENT OCCUPIED status will appear in the automatic status scroll. To resume
to regular scheduling, user must scroll to the Schedule Hold menu and select the Schedule
resume option..
Schedule
uno hold
Hold permanent unoccupied forces the thermostat into a permanent unoccupied mode
using the unoccupied setpoints. All timed scheduling functions are by-passed.
The PERMANENT UNOCCUPIED status will appear in the automatic status scroll. To
resume to regular scheduling, user must scroll to the Schedule Hold menu and select the
Schedule resume option..