Top Flite Sierra 40 Trainer Kit - Manual (Page 3)

WARNING! THIS IS NOT A TOY!
The model you will build from this kit is not a toy! It is capable of serious bodily harm
and property damage. IT IS YOUR RESPONSIBILITY AND YOURS ALONE - to build
this kit correctly, properly install all R/C components to test fly the model, and fly it
ONLY with experienced, competent help using common sense and in accordance with
all safety standards as set down in the Academy of Model Aeronautics Safety Code.
It is suggested that you join the AMA to become properly insured before you attempt
to fly the model. IF YOU ARE JUST STARTING R/C MODELING, CONSULT YOUR
LOCAL HOBBY SHOP OR WRITE TO THE ACADEMY OF MODEL AERONAUTICS
TO FIND AN EXPERIENCED FLYING INSTRUCTOR IN YOUR AREA.
Academy of Model Aeronautics
1810 Samuel Morse Drive
Reston, VA 22090 (703) 435-0750
INTRODUCTION
Thank you for purchasing the Top Flite
GOLD EDITION Sierra.
The Top Flite Sierra is an excellent trainer model
designed to get you off to a great start in learning to
build and fly. After you learn to fly, the Sierra also has
enough maneuverability to perform most basic aero-
batics and provide many hours flying enjoyment.
The easy construction, great lines, and included
decals make it easy for you to build a great-looking
model.
The Top Flite Sierra is designed to fly as good as
it looks. Its thick, flat-bottom wing offers strong lift at
slow speeds and great strength. The computer-
designed, interlocking structure allows you to build a
straight and true model with smooth confidence-
boosting flight qualities.
Please inspect all parts carefully before
starting to build! If any parts are missing, broken
or defective, or if you have any questions about
building or flying this model, please call us at
(217) 398-6300 and we'll be glad to help. If you
are calling for replacement parts, please look up
the part numbers and the kit identification num-
ber (stamped on the end of the carton) and have
them ready when calling.
PRECAUTIONS
1. You must build the plane according to the plans
and instructions. Do not alter or modify the model,
as doing so may result in an unsafe or unflyable
model. In a few cases the plans and instructions may
differ slightly from the photos. In those instances you
should assume the plans and written instructions are
correct.
3
2. You must take your time to build straight true
and strong.
3. You must use a proper R/C radio that is in first
class condition, the correct engine size and correct
components (fuel tank. wheels, etc.) throughout
your building process.
4. You must properly install all R/C and other com-
ponents so that the model operates properly on the
ground and in the air.
5. You must test the operation of the model before
the first and each successive flight to insure that all
equipment is operating, and to make certain that the
model has remained structurally sound. Be sure to
check external nylon clevises often. Replace them
if they show signs of wear.
6. You must fly the model only with the competent
help of a well experienced R/C pilot, if you are not
already an experienced R/C pilot at this time.
NOTE: We, as the kit manufacturer, can provide
you with a top quality kit and great instructions,
but ultimately the quality and flyability of your
finished model depends on how you build it;
therefore, we cannot in any way guarantee the
performance of your completed model, and no
representations are expressed or implied as to
the performance or safety of your completed
model.
Remember: Take your time and follow the di-
rections to complete a well-built model that is
straight and true.