Toa HY-1500HW - Manual (Page 8)

8
4.2. When Using in conjunction with the Optional Mount Bracket
The H- or V-Series Mounting Bracket allows speaker's horizontal angle to be adjusted in conjunction with the
optional HY-C0801 or HY-C0801W Ceiling Mount Bracket.
The following figure shows an example of vertical speaker installation.
Hex bolt M8 x 25
(supplied with the HY-C0801
and HY-C0801W)
Fixed nut
To the ceiling surface
Nut for M8
Bracket A
(supplied with the HY-C0801
and HY-C0801W)
Notch
Safety bolt
Horizontal
angle adjustment nut
Bracket B
(supplied with the
HY-C0801 and HY-C0801W)
H- or V-Series
Mounting Bracket
Plain washer for M8
(supplied with the H- and
V-Series Mounting Brackets)
Nut for M8
(supplied with the H- and
V-Series Mounting Brackets)
Speaker system
(HS-120/150/1200/1500 series)
Bracket holder
(supplied with the H- and V-Series Mounting Brackets)
Plain washer
150 (5.91)
120 (4.72) 8 - ø11 (0.43)
150 (5.91) 120 (4.72)
[Dimensional diagram of the Bracket A]
Note
Be sure to secure with at least all 4 corner-
mounting holes in the Bracket A.
Unit: mm (inches)