Toa HY-1500HW - Manual (Page 12)

12
Step 7. Tighten the loosely fitted bolts in Step 2.
Note: Check that all bolts are securely tightened.
For the speaker installed view, refer to p. 3, "Examples of wall installation."
5.2. When Using in conjunction with the Optional Mount Bracket
The H- or V-Series Mounting Bracket allows speaker's horizontal angle to be adjusted in conjunction with the
optional HY-W0801 or HY-W0801W Wall Mount Bracket.
Notes
• When the HY-1200 Series Bracket is used, the adjustable angle range is as follows.
Vertical angle range: 15° upward to 90° downward (with reference to the horizontal axis as 0°)
Horizontal angle range: 90° to the left or right (with reference to the front direction as 0°)
• When the HY-1500 Series Bracket is used, the adjustable angle range is limited.
For details, refer to "HY-1500 Series Brackets' adjustable angle range" on the next page.
6-2. For the H-Series Mounting Bracket
15°
60°
7.5°
10 × 7.5° (75°
)
0° (Horizontal)
Hex bolt (M6 x 30)
(accessory)
Wall
Angle adjustment hole
The speaker angle is adjustable in 7.5° steps with
the angle adjustment hole in the mounting bracket.
Hex bolt M8 x 25
(supplied with the HY-W0801 and HY-W0801W)
Safety bolt
To the wall surface
Nut for M8
Bracket A
(supplied with the HY-W0801 and HY-W0801W)
Fixed nut
Notch
Bracket B
(supplied with the HY-W0801
and HY-W0801W)
H- or V-Series Mounting Bracket
Plain washer for M8
(supplied with the H- and V-Series
Mounting brackets)
Nut for M8
(supplied with the H- and V-Series
Mounting brackets)
Bracket holder
(supplied with the
H- or V-Series Mounting bracket)
Plain washer
This figure shows an example
of vertical speaker installation.
Speaker system
(HS-120/150/1200/1500 series)
6 - ø9.2 (0.36)
[Dimensional diagram of
the Bracket A]
Unit: mm (inches)
Note
Be sure to use 6 mounting holes
in the Bracket A.
90 (3.54)
60 (2.36)
120
(4.72)
201.2 (7.92)
176 (6.93)
Horizontal angle
adjustment nut