Toa HY-1500HW - Manual (Page 5)

5
Note
The bolt mounting position differs depending on the speaker's vertical angle as shown below.
The angle is given with reference to the horizontal axis (0°).
1-2. For horizontal speaker installation (H-Series Mounting Bracket)
Speaker direction angle can be adjusted from 0° to 90° downward.
Bracket holder
(accessory)
Machine screw M6 x 20
(accessory)
• 0° to 60° downward
Adjustable speaker direction angle
• 75° to 90° downward
2-2. For horizontal speaker installation (H-Series Mounting Bracket)
Speaker direction angle can be adjusted from 0° to 90° downward.
Bracket holder
Hex bolt M6 x 30
(accessory)
• 0° to 60° downward
Adjustable speaker direction angle
• 75° to 90° downward
Step 2. Screw the supplied hex bolt loosely into the bracket holder.
Leave the bolt head out about 4 mm (0.16") to allow the
mounting bracket to be inserted.
Follow the same installation procedure to the other side.
Bracket holder
Hex bolt M6 x 30
(accessory)
About 4 mm (0.16")
2-1. For vertical speaker installation (V-Series Mounting Bracket)
Speaker direction angle can be adjusted from 15° upward to 90° downward.
Bracket holder Hex bolt M6 x 30
(accessory)
• 15° upward to 60° downward
Adjustable speaker direction angle
• 75° to 90° downward