Toa VM-3000 Series - Manual (Page 88)

88
13.11.2. Simultaneous EV message registration
[When no EV message files are registered in the VM-3000VA (default setting)]
Step 1. Press the "Reference" button.
Select the EV message file from those stored in the PC, then its filename is displayed in the "File
Select" field on the setting screen.
Step 2. Display all message files to be registered on the PC setting screen.
Step 3. Press the "PC->VM-3000VA" button located in the lower part of the screen.
This allows all EV message files displayed on the screen to be read into the VM-3000VA at once.
[When the EV message file has already been registered in the VM-3000VA (registration by overwriting)]
Step 1. Press the "VM-3000VA->PC" button located in the lower part of the screen.
The EV message files registered in the VM-3000VA are loaded into the PC's setting screen.
Step 2. Edit and update the message file(s) to be changed.
Step 3. Press the "PC->VM-3000VA" button located in the lower part of the screen.
All EV message files displayed on the screen are simultaneously read into the VM-3000VA.
13.11.3. Individual EV message file registration
Step 1. Press the "VM-3000VA->PC" button located in the lower part of the screen.
The EV message files registered in the VM-3000VA are loaded into the PC's setting screen.
Step 2. Edit and update the message file to be changed.
Step 3. Press the individual "PC->VM-3000VA" button for the updated EV message file.
The message file is individually written into the VM-3000VA.
13.11.4. Individual EV message file erasure
Step 1. Press the "VM-3000VA->PC" button.
The EV message files registered in the VM-3000VA are loaded into the PC's setting screen.
Step 2. Press the "Reset" button for the EV message file.
The EV message file is deleted from the PC's setting screen.
Step 3. Press the "Delete" button.
The EV message file is deleted from the VM-3000VA.