Toa VM-3000 Series - Manual (Page 59)

59
(3) Name
Sets the name for the key.
Note
Keys L1 – L4 are not used, however only their names can be set.
(4) Function
Sets the function to be assigned to the key.
(5) Contents 1
Cannot be used when "Disable" has been selected in the Function settings (4).
Used to set broadcast zones when "Zone Selection" is selected in (4) Function settings.
Only the zones registered in the
Zone settings (page 46) can be set.
If "EV Start" has been selected in the function setting (4), set the desired EV (electronic voice announcing)
message (built-in sound source).
(6) Contents 2
Cannot be used when "Disable" and "EV Start" have been selected in the Function settings (4).
If "Zone Selection" has been selected in the Function settings (4), set the control output to be activated.
(7) Next button
This button can be used if "Number of RM-210s" is set to 1 or more.
Pressing this button moves the display to the RM-210 key function setting screen.
(Refer to the next page.)
Available Settings 16 alphanumeric characters (default name: RM200M/#R*, in which [#] is the RM-
200M's ID number and [*] is the key number.)
Available Settings Disable (default), Zone Selection, EV Start
Available Settings Disable (default), Zone 1 – 90
Available Settings Disable (default), VA-GENERAL-CI 1 - 8 and E#-GENERAL-CI 1 - 8, in which "#"
is the ID number.
Available Settings EV-1 to EV-6 (default: EV-1)