Toa VM-3000 Series - Manual (Page 40)

40
Note
The surveillance setting data created by the Ver. 1.xx software are converted according to the following rule
when read on the Ver. 2.00 software.
(13) General RM
Checks communications between the relevant RM-200M and VM-3000VA.
(14) External Amplifier
Checks external amplifier condition. (Only displayed when the system type is set to "BGM/PAGING
System" in the system settings.)
(15) Standby Amplifier
Checks standby amplifier condition. (Only displayed when the system type is set to "Standby amplifier:
used" in the system settings.)
(10) Speaker (Earth Fault)
Checks the earth fault of the speaker lines for the relevant unit.
(11) Charging Equipment
Checks the condition of the recharging circuit of the VX-2000DS connected to the relevant unit.
(12) Emergency Control Input
Checks for disconnection or short circuits in the emergency control input lines from external equipment
connected to the relevant unit.