Toa VM-3000 Series - Manual (Page 86)

86
(1) "VM-3000VA->PC" button
Reads the VM-3000VA 's registered EV message files into the PC's message file registration screen.
After reading is complete, the indication as shown above is
displayed. In this event, the indication shown at right is displayed on
the VM-3000VA's LCD screen.
The function of each button is explained as follows on the assumption that EV messages have been
registered in a PC.
(2) "Reference" button
Registers the EV message files in the PC's message file registration screen. Pressing this button displays
a message file selection dialog.
Designate the folder in which the message files are stored and select the message file(s) to be used.
Notes
•
Only WAV-format PCM 48kHz monaural files can be used for EV messages.
• Any filename can be assigned to an EV message. However, if any message file is transferred to the VM-
3000VA and then read into a PC, its filename is automatically changed to the default name as follows:
General EV message 1: VMEVMSG1.WAV
General EV message 2: VMEVMSG2.WAV
General EV message 3: VMEVMSG3.WAV
General EV message 4: VMEVMSG4.WAV
General EV message 5: VMEVMSG5.WAV
General EV message 6: VMEVMSG6.WAV
Evacuation message: VMEVEMG1.WAV
Alert message: VMEVEMG2.WAV
T R A N S M I T T I N G
C O M P L E T E
(1)
(2) (3) (4) (5)
(6)
(7)
(8) (9)
(10)