Toa M-9000M2 CE-AU - Manual (Page 63)

63
10. FIRMWARE UPDATE
To update the 9000M2 amplifier's firmware, confirm that communications are possible between the amplifier
and the PC, then select "Option
Update Firmware..." from the menu on the main screen.
A firmware update dialog is displayed.
Step 1. Switch the 9000M2 amplifier's power ON while holding down its front panel "INPUT SELECT 8" and
"ESC/BACK" keys to put the amplifier in "Update" mode.
Step 2. Compare the amplifier version with the update file version and confirm that the update file version (the
"xxxx" part of A9000M2xxxx.mot) is the latest.
Step 3. Click the "Browse..." button in the update file selection area to select the update file (*.mot).
Step 4. Click the "START" button to start update. (Communication settings are automatically performed.)
Step 5. A progress bar is displayed during update.
Update file selection
Commencement of update
Important
• Avoid switching OFF the power or disconnecting the cable during update.
• The update file only for 9000M2 Series can be used with this 9000M2 Series unit.
• The update file for 9000 Series can NOT be used with this 9000M2 Series unit.
• When the update file which is not allowed is used, the error message like "Failed to update
firmware" is displayed.
• If the error message is displayed, please check the procedure and the update file again, then
please update using a correct update file.