Creating a new file, Creates a new file, P. 11 – Toa M-9000M2 CE-AU User Manual
Page 11
11
4.1. Creating a New File
Clicking "New File" on the Start Menu screen displays the following initial setting wizard screen.
Perform initial settings according to the initial setting wizard.
Step 1. Set module configurations.
1-1. Select a module inserted into the amplifier's slots from the pull-down menu in the "Module" field of the
"Slot Configuration" area.
1-2. Performing module setting displays the module model number in the Module Setting space at the top
of the screen. Also, the channel name entry field is displayed in the "Slot Setting" area depending on
the number of inputs of the module.
1-3. Enter a name in the "name" field as required.
1-4. This completes all the Slot settings. Clicking the "NEXT" button displays the main screen (refer to