Toa TS-900 Series - Manual (Page 16)

16
[Bottom]
9. Lithium-ion battery compartment
Install only a dedicated BP-900 Lithium-Ion
Battery in this compartment.
10. Unit address number setting switch
Set the unit address number ([01] – [96]), taking
care to ensure that the same number is not
duplicated in the system.
If the number [00] is assigned to a unit, the user
of that unit cannot speak. However, the unit can
be used for monitoring.
Note
This number is factory-preset to [00].
UNIT ID
1
10
10
9
Remove the cover on the bottom side of the unit to expose its setting switches.
Note
The label describing the setting switches is shown
in the following figure.