Toa TS-800 Series User Manual
Page 56

56
TS-903
TS-904
Electret condenser microphone
Unidirectional
1.8 kΩ
–37 dB (1 kHz, 0 dB = 1 V/Pa)
Speech (lighting) / low battery (flashing) indicator (ring type)
100 – 13,000 Hz
XLR-4-32 type
Gooseneck: Stainless steel, black
Other:
ABS resin, black
368 mm
518 mm
90 g
105 g
Chairman unit: TS-801, Delegate unit: TS-802
Power Source
7.4 V DC (battery), 9 V DC (AC adapter)
(supplied from BP-900 battery or AD-0910 AC adapter)
Current Consumption
Max. 270 mA
Wavelength
870 nm (AM: Brightness modulation)
Modulation Method
Frequency modulation
Carrier Frequency
Transmission: Audio channel 1: 7.35 MHz
Audio channel 2: 8.10 MHz
Audio channel 3: 8.55 MHz
Audio channel 4: 9.15 MHz
Control channel: 6.45 MHz
Reception:
Audio channel:
1.95 MHz
Acceptance Angle
Vertical: 90°, Horizontal: 120°
Emission Angle
Vertical: 90°, Horizontal: 120°
Input
Microphone terminal: XLR-4-31 type
(For connecting the optional TS-903 or TS-904)
Output Monitor
speaker: 8
Ω, 0.2 W
Headphone:
Mini jack x 2
LED Indicator
Speech indicator (flashes when the unit is out of communications range),
Power indicator (flashes when the unit is out of communications range or
when the battery level is low)
Battery Life
Approx. 10 hours (when the fully-charged BP-900 battery is used with
"During speech" to "Standby" ratio of 1:2)
Operating Temperature
0°C to 40°C
Finish
Top Panel: ABS resin, gray metallic, paint, semi-gloss
Dimensions
210 (w) x 65.9 (h) x 152 (d) mm
Weight 630
g
17.2. Chairman Unit TS-801, Delegate Unit TS-802
17.3. Microphone (standard) TS-903, Microphone (long) TS-904
Infrared Emitter/Detector
Note: The design and specifications are subject to change without notice for improvement.
Note: The design and specifications are subject to change without notice for improvement.
Model No.
Type
Directivity
Rated Impedance
Rated Sensitivity
LED Indicator
Frequency Response
Output Connector
Finish
Length
Weight
Applicable Unit (Option)