beautypg.com

Function settings, Speech priority settings – Toa TS-800 Series User Manual

Page 20

background image

20

7. FUNCTION SETTINGS

7.1. Setting the Maximum Number of Simultaneous Speakers

Using the Simultaneous Speaker No. Setting switch on the TS-800 Central
Unit, set the maximum total number of Chairman and Delegate units that
can simultaneously initiate speech.

Set the switch to [1], [2], or [4] depending on the type of the conference.
These numbers indicate the number of units that can simultaneously
initiate speech. (This switch is factory-preset to the [1] position.)
Note
When the Talk key is pressed at a unit exceeding the set maximum
number, the corresponding unit can only initiate speech as determined in
the speech priority settings referred to in the next section.

7.2. Speech Priority Settings

Operation following the depression of the Talk key on a Chairman or
Delegate unit, when the maximum number of speakers that can be
simultaneously initiated is reached, can be selected with the Speech
Priority Selector switch on the TS-800 Central unit.

7.2.1. Mode A: first-in/first-out priority (factory-preset switch position)

Speech is initiated on a first-come/first-served basis. When the maximum
number of speakers is reached, subsequent speech requests cannot be
accepted, even if the Talk key is pressed.

• Example showing the number of simultaneous speakers set to [2].

7.2.2. Mode B: last-in/first-out priority

When the maximum number of simultaneous speakers is reached, input from the most recent subsequent
Talk key-enabled Chairman or Delegate unit takes precedence, thus rendering earlier enabled units
inoperable.

• Example showing the number of simultaneous speakers set to [2].

TIME OUT

OFF

PRIORITY

A: FIRST
B: LATEST
C: FIRST: FIXED, NEXT: LATEST

A B C

MIC

DATA–EXTERNAL–PRIORITY

UNIT

MAX

1 2 4

ON

FUNCTION SETTING

Simultaneous speaker No.
setting switch

TIME OUT

OFF

PRIORITY

A: FIRST
B: LATEST
C: FIRST: FIXED, NEXT: LATEST

A B C

MIC

DATA–EXTERNAL–PRIORITY

UNIT

MAX

1 2 4

ON

FUNCTION SETTING

Speech priority selector switch

TALK

TALK

TALK

Chairman or Delegate unit

[First unit]

Press the talk key.

First unit: Speech possible.

[Second unit]

Press the talk key.

First unit: Speech possible.
Second unit: Speech possible.

[Third unit]

Press the talk key.

First unit: Speech possible.
Second unit: Speech possible.
Third unit: Speech not possible.

TALK

TALK

TALK

Chairman or Delegate unit

[First unit]

Press the talk key.

First unit: Speech possible.

[Second unit]

Press the talk key.

First unit: Speech possible.
Second unit: Speech possible.

[Third unit]

Press the talk key.

First unit: Speech cancelled.
Second unit: Speech possible.
Third unit: Speech possible.