Toa TS-800 Series - Manual (Page 18)

18
6. OPERATION
6.1. Initiating Speech
Step 1. Press the Talk key on the Chairman or
Delegate unit.
The Speech indicator and Microphone
In-Use indicator light, placing the unit in
speech mode.
No sound is output from the monitor
speaker while both indicators are
continuously lit.
Note
The unit cannot be used for speech if the
indicators do not light.
Step 2. Speak into the microphone.
Step 3. Press the Speech key again after
speech completion.
The indicators extinguish, and sound
can be output from the monitor speaker.
Note
When the user forgets to turn off the
microphone, the Mic-Off function
automatically turns off the microphone
approximately 30 seconds after speech
completion. (Refer to p. 21.)
CHAIRMAN UNIT TS-801
TALK PRIORITY
POWER
Microphone
in-use indicator
Speech indicator
The figure shows the TS-801.