TeeJet 844 Sprayer Control - Manual (Page 42)

40
Terms and Conditions of Sale
(1) MODIFICATION OF TERMS
Seller’s acceptance of any order is expressly subject to
Buyer’s assent to each and all of the terms and conditions
set forth below and Buyer’s assent to these terms and
conditions shall be conclusively presumed from Buyer’s
receipt of this document without prompt written objection
thereto or from Buyer’s acceptance of all or any part of the
goods ordered. No addition to or modification of said
terms and conditions shall be binding upon Seller unless
specifically agreed to by Seller in writing. If Buyer’s pur-
chase order or other correspondence contains terms or
conditions contrary to or in addition to the terms and con-
ditions set forth below, acceptance of any order by Seller
shall not be construed as assent to such contrary or addi-
tional terms and conditions or constitute a waiver by Seller
of any of the terms and conditions.
(2) PRICE
Unless otherwise specified: (a) all prices, quotations, ship-
ments and deliveries by Seller are f.o.b. Seller’s plant;
(b) all base prices together with related extras and deduc-
tions, are subject to Seller’s price in effect at the time of
shipment; and (c) all transportation and other charges
are for the account of Buyer, including all increase or
decrease in such charges prior to shipment. Payment of
said price shall be due at the remittance address shown
on the Seller’s invoice 30 days after the date of Seller’s
invoice. Interest will be charged at a rate of 1
1 ⁄
2
% per
month on all balances outstanding more than 30 days
after the date of the invoice.
(3) MINIMUM BILLING
The minimum billing by the Seller for any order shall
be $20.00.
(4) WARRANTIES
Seller warrants that its products will conform to and per-
form in accordance with the products’ specifications.
Seller warrants that the products do not infringe upon any
copyright, patent, or trademark.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THOSE CON-
CERNING MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
(5) LIMITATION ON LIABILITIES
Because of the difficulty of ascertaining and measuring
damages hereunder, it is agreed that, except for claims
for bodily injury, Seller’s liability to the Buyer or any third
party, for any losses or damages, whether direct or oth-
erwise, arising out of the purchase of product from Seller
by Buyer shall not exceed the total amount billed and
billable to the Buyer for the product hereunder. IN NO
EVENT WILL SELLER BE LIABLE FOR ANY LOSS
OF PROFITS OR OTHER SPECIAL OR CONSE-
QUENTIAL DAMAGES, EVEN IF SELLER HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
(6) QUALITY ASSURANCE
Seller shall have no obligation to ensure that any goods
purchased from Seller meet any special Buyer quality
assurance specifications and/or other special Buyer
requirements unless such specifications and/or other
requirements are specifically set forth in Buyer’s pur-
chase order and expressly accepted by Seller. In the
event that any such goods supplied by Seller in con-
nection therewith, are applied to an end use without the
appropriate specification and/or other requirement there-
fore having been set forth in Buyer’s purchase order
and expressly accepted by Seller, Buyer shall indemnify
and hold Seller harmless against any and all damages
or claims for damages made by any person for any
injury, fatal or nonfatal, to any person or for any damage
to the property of any person incident to or arising out of
such application.
(7) CLAIMS
Claims respecting the condition of goods, compliance
with specifications or any other matter affecting goods
shipped to Buyer must be made promptly and, unless
otherwise agreed to in writing by Seller, in no event later
than one (1) year after receipt of the goods by Buyer.
Claims respecting the failure of any TeeJet Automatic
Sprayer Control System Component due to defective
materials or workmanship must be made not later than
three (3) years from the date of purchase. In no event
shall any goods be returned, reworked or scrapped by
Buyer without the express written authorization of Seller.
(8) DEFAULT IN PAYMENT
If Buyer fails to make payments on any contract
between Buyer and Seller in accordance with Seller’s
terms, Seller, in addition to any other remedies avail-
able to it, may at its option, (i) defer further shipments
until such payments are made and satisfactory credit
arrangements are reestablished or (ii) cancel the
unshipped balance of any order.
(9) TECHNICAL ASSISTANCE
Unless otherwise expressly stated by Seller: (a) any
technical advice provided by Seller with respect to the
use of goods furnished to Buyer shall be without charge,
(b) Seller assumes no obligation or liability for any such
advice, or for any results occurring as a result of the
application of such advice; and (c) Buyer shall have sole
responsibility for selection and specification of the goods
appropriate for the end use of such goods.
(10) CANCELLATION OF SPECIAL
ORDERS
Special Orders or goods specially manufactured for
Buyer cannot be canceled or modified by Buyer, and
releases cannot be held up by Buyer, after such goods
are in process except with the express written consent of
Seller and subject to conditions then to be agreed upon
which shall include, without limitation, protection of Seller
against all loss.
(11) PATENTS
The Seller shall not be liable for any costs or damages
incurred by the Buyer as a result of any suit or proceed-
ing brought against Buyer so far as based on claims (a)
that use of any product, or any part thereof, furnished
hereunder, in combination with products not supplied by
the Seller or (b) that a manufacturing or other process uti-
lizing any product, or any part thereof furnished hereun-
der, constitute either direct or contributory infringement of
any patent of the United States.
The Buyer shall hold the Seller harmless against any
expense or loss resulting from infringement or patents or
trademarks arising from compliance with Buyer’s designs
or specifications or instructions.
(12) COMPLETE AGREEMENT
The terms and conditions set forth herein, together with
any other documents incorporated herein by reference
constitute the sole and entire agreement between Buyer
and Seller with respect to any order superseding com-
pletely any oral or written communications. No additions
to or variations from such terms and conditions whether
contained in Buyer’s purchase order, any shipping
release or elsewhere shall be binding upon Seller unless
expressly agreed to in writing by Seller.
(13) GOVERNING LAW
All orders are accepted by Seller at its mailing address in
Wheaton, Illinois, and shall be governed by and inter-
preted in accordance with the laws of the State of Illinois.
Flow Meter Maintenance
DAILY MAINTENANCE
• Unscrew sensor from the flow meter assembly
• Remove flow meter from the system
(If Rapid Check, remove the rapid check unit from the body)
• Use clean water to wash any impurities out of the flow meter
(out of the removable turbine unit if rapid check)
• Blow compressed air (Max.15 PSI / 1 bar) through
the flow meter (turbine unit) to verify that the turbine unit
rotates freely
• Reinstall flow meter (turbine unit)
LONG TERM MAINTENANCE
• Should be performed every 50 hours of operation
• Unscrew sensor from the flow meter assembly
• Remove flow meter from the system
(If Rapid Check, remove the rapid check unit from the body)
• Use clean water to wash any impurities out of the flow meter
(out of the removable turbine unit if rapid check)
• Place the flow meter (rapid check unit) in a detergent bath
(can be diesel fuel) for a few hours
• Remove the flow meter (rapid check unit) from the
detergent bath
• Blow compressed air (Max. 15 PSI/1 bar) through the flow
meter (turbine unit) to verify that the turbine unit rotates freely
• Reinstall flow meter (turbine unit)