TeeJet 844 Sprayer Control - Manual (Page 12)

MOUNTING THE TEEJET 844 CONSOLE
Location
Determine the best location for the control console in the cab or operator’s
compartment. Allow sufficient clearance, approximately 4-5˝ (10-12 cm) to
accommodate for the power and operating cables that will be connected to the
cable leads and connectors on the right side of the console.
Mounting
Mount the console to a firm support within the cab area, and secure using the
slots provided on the top, back, or bottom of the Console. Although two simple
brackets are supplied with the unit, some additional bracketing may be
necessary. The slots in the 844 will accept 1/4˝ (6 mm) bolts.
10
1
CONSOLE
S T E P
2
CONSOLE
S T E P
BRACKETS PROVIDE
ANGLE ADJUSTMENT