TeeJet TASC DATA LOGGER - Manual (Page 15)

MIDWEST TECHNOLOGIES, INC.
SPRINGFIELD, ILLINOIS 62703
15
TASC DATA-LOGGER-R1
PN - 999-1522
2. Inserting the Paper Roll
a. Press the POWER switch to the OFF position.
b. Unroll several inches of the paper.
c. Cut a straight edge on the paper roll if it is jagged. This will facilitate the entry of the paper
into the printer.
d. Slide the paper through the slot connecting the paper compartment and the printer compart-
ment. You can slide it in about one quarter inch before it stops.
e. Press the POWER switch to the ON position and wait a few seconds.
f. While holding the paper in place, press the POWER switch to the TEST position. The
Printer will activate, and a rubber roller will pull the paper into the printer compartment. Hold
the switch in the TEST position until the paper emerges from the top of the printer
mechanism.
When an inch of paper has emerged from the top of the printer, release the TEST
button.