TeeJet TASC DATA LOGGER - Manual (Page 10)

MIDWEST TECHNOLOGIES, INC.
SPRINGFIELD, ILLINOIS 62703
10
TASC DATA-LOGGER-R1
PN - 999-1522
LOGGING WEATHER DATA:
Weather Data is logged manually by the operator. This information is printed out and/or logged into memory
for that point in time only and must be changed (re-entered) as weather conditions change.
Press 2 from the MAIN MENU to display the LOG WEATHER screen.
1. SUNNY
2. PARTLY CLOUDY
3. CLOUDY
Enter the proper sky condition by pressing 1, 2, or 3.
The screen will advance to the additional weather data screen.
TEMPERATURE 000F
WIND SPEED 00 MPH
REL HUMIDITY 00%
SOIL pH 0.0
Enter the correct value for each item and press the “ENTER” key to advance to the next data entry point.
Once the "SOIL pH" has been entered, the next screen will advance to "WIND DIRECTION".
WIND DIRECTION-
N
NE E SE
S SW W NW
Use the arrow keys to move the cursor to proper letter code indicating the wind direction (North, North East,
East, South East, South, South West, West, or North West) and press the "ENTER" key.
When this last line is complete and entered, the data will be printed out on the printer and/or logged to memory
(DATA-LOGGER Models).
NOTE: THE WEATHER DATA IS AUTOMATICALLY CLEARED AFTER EACH ENTRY AND MUST BE RE-
ENTERED BY THE OPERATOR WHENEVER CHANGES TO THESE CONDITIONS WARRANT DOING
SO.
LOGGING CHEMICALS:
The TASC DATA-LOGGER can be used to record the chemicals being applied by each Chemical Injection
Pump.
The LOG CHEMICALS feature is accessed from the MAIN MENU screen.
1. LOG LOCATION
2. LOG WEATHER
3. LOG CHEMICALS
10:45 AM 99%