TeeJet TASC DATA LOGGER - Manual (Page 14)

MIDWEST TECHNOLOGIES, INC.
SPRINGFIELD, ILLINOIS 62703
14
TASC DATA-LOGGER-R1
PN - 999-1522
c. Push down on the right side of ribbon cartridge (marked “PUSH”) and remove the cartridge.
d. Install cartridge. Be sure the ink cartridge is inserted firmly to prevent weak
or irregular printing. The cartridge must be properly seated and aligned for best printing.
e. Turn the cartridge “knob” (marked by an arrow) clockwise to stretch the ribbon.
f. Replace the cover.
g. Replace the paper.
You may also insert the ribbon cartridge if there is already paper in the printer.
NOTE: If you get ribbon ink on the plastic case, wipe it off immediately. Once it dries, it is
difficult to remove.