TeeJet TASC DATA LOGGER - Manual (Page 11)

MIDWEST TECHNOLOGIES, INC.
SPRINGFIELD, ILLINOIS 62703
11
TASC DATA-LOGGER-R1
PN - 999-1522
Press 3 to select the LOG CHEMICALS screen.
ENTER CHEM CODES
PUMP # 1 - 0 0
PUMP # 2 - 0 0
PUMP # 3 - 0 0
Enter the proper chemical code for each pump by using the digit keys on the keyboard. Press the "ENTER"
key to advance to the next pump. Pressing the "ENTER" key after entering the code for PUMP #3 will advance
to the next screen.
ENTER CHEM CODES
PUMP # 4 - 00
PUMP # 5 - 00
PUMP # 6 - 00
Pressing the "ENTER" key after entering the code for PUMP #6 to return the screen to the MAIN MENU.
1. LOG LOCATION
2. LOG WEATHER
3. LOG CHEMICALS
10:45 AM 99%
Users may wish to use existing chemical codes or produce their own reference chart for each chemical to be
used with the system. If multiple tanks are used and there are less than 9 chemicals in the look up chart, you
may want to use the first digit of the 2 digit chemical code as a tank designation.
For example: If chemical # 8 is being applied from tank #1 through pump #1, chemical # 9 is being applied
from Tank # 3 through pump # 2, and chemical #2 is being applied from Tank #5 through pump #3, enter
the following Chemical Codes.
ENTER CHEM CODES
PUMP # 1 - 1 8
PUMP # 2 - 3 9
PUMP # 3 - 5 2
DOWNLOADING DATA TO A "PC COMPUTER":
If the amount of space left in memory gets down below 2%, the display will flash the following message:
>>MEMORY IS LOW<<
When the memory locations are completely full the display will show the following message:
MEMORY IS FULL!
>>DUMP DATA<<
After this message is displayed the DATA-LOGGER will automatically dump all additional data to the printer.
Downloading the data will generally be done in an office environment using the AC Adapter to power the Printer
Module. The DATA-LOGGER will automatically turn on and print "Ready" when plugged in to the AC adapter.
Turn the small printer "OFF". NOTE: If the small printer is left "ON", the module will try to print out the data
being downloaded.