TeeJet TASC-6500 - Manual (Page 5)

999-1511 TASC 6200/6500
M-T 96162 5
1.0 INTRODUCING TASC FOR THE NEW GENERATION SPREADERS
The TASC 6500 is a five channel controller. Two channels are designed to operate positional control
valves while the other three channels are designed to operate either proportional control valves or DC
motors. This gives the MID-TECH TASC 6500 the flexibility to control almost any mobile applicator using a
single console.
All five channels control spread or spray rates in relation to ground speed and width. Each channel has two
programmable rates or can be changed by a percentage amount ON THE GO. The TASC 6500 is easy to
calibrate and operate and incorporates many self check features to help the operator keep his system
running in top condition.
The TASC 6200 is a simpler version of the TASC Spreader Control. TASC 6200 controls two channels
designed to operate positional control valves. Typically, this would be a conveyor and a wet boom.
The following schematics show a few MID-TECH TASC 6500 system possibilities.
TASC-6500
CHEMICAL APPLICATORS
1 2 3
ON
OFF
Alt.-
RATE
%Rate
DISPLAY SELECTOR
Speed
Area Width
Distance
Vol. Applied
Test
Speed
Fan RPM
Vol. Applied
Appl. Rate Appl. Rate
OFF SET- UP DEC
ON OPERATE INC
.
1 2 3 4 5 6 7 8 9
BOOMS
Scan
MID-TECH
¨
MIDWEST TECHNOLOGIES,
INC.
RATE CONTROL CHANNELS
L & CHEMICALS CARRIER
Mph
L C
MIDWEST TECHNOLOGIES, INC.
TASC 6200/6500 SPREADER CONTROL