Casio fx-9750G PLUS - Manual (Page 46)

18
1 - 1
Before Starting Calculations...
k k k k k Stacks
The unit employs memory blocks, called stacks, for storage of low priority values
and commands. There is a 10-level numeric value stack, a 26-level command
stack, and a 10-level program subroutine stack. An error occurs if you perform a
calculation so complex that it exceeds the capacity of available numeric value
stack or command stack space, or if execution of a program subroutine exceeds
the capacity of the subroutine stack.
Example
• Calculations are performed according to the priority sequence. Once a
calculation is executed, it is cleared from the stack.
• Storing a complex number takes up two numeric value stack levels.
• Storing a two-byte function takes up two command stack levels.
k k k k k
Input, Output and Operation Limitations
The allowable range for both input and output values is 10 digits for the mantissa
and 2 digits for the exponent. Internally, however, the unit performs calculations
using 15 digits for the mantissa and 2 digits for the exponent.
Example 3 Ч 10 5
ч 7 – 42857 =
A dEf/hw
dEf/h-
ecifhw
1
2
3
4
5
b
c
d
e
f
g
h
2
3
4
5
4
Ч
(
(
+
Ч
(
+
...
...
Numeric Value Stack Command Stack
P.16
P.19