Casio fx-9750G PLUS - Manual (Page 429)

401
21-2 Connecting the Unit with a Personal
Computer
To transfer data between the unit and a personal computer, you must connect
them through a separately available CASIO FA-123 connection cable.
For details on operation, the types of computer that can be connected, and
hardware limitations, see the user’s manual that comes with the FA-123.
Some types of data may not be able to be exchanged with a personal computer.
u u u u u To connect the unit with a personal computer
1. Check to make sure that the power of the unit and the personal computer is off.
2. Connect the FA-123 connection cable to the personal computer.
3. Remove the cover from the connector of the unit.
• Be sure you keep the connector cover in a safe place so you can replace it
after you finish your data communications.
4. Connect the FA-123 connection cable to the unit.
5. Turn on the power of the unit, followed by the personal computer.
• After you finish data communications, turn off power in the sequence: the unit
first, and then the personal computer. Finally, disconnect the equipment.