Clevo M860TU User Manual
Clevo Notebooks
Table of contents
Document Outline
- Manual
- Preface
- 1: Introduction
- Overview
- System Specifications
- External Locator - Top View with LCD Panel Open
- External Locator - Front and Rear View
- External Locator - Left & Right Side View
- External Locator - Bottom View
- Mainboard Overview - Top (Key Parts)
- Mainboard Overview - Bottom (Key Parts)
- Mainboard Overview - Top (Connectors)
- Mainboard Overview - Bottom (Connectors)
- 2: Disassembly
- Overview
- Maintenance Tools
- Connections
- Maintenance Precautions
- Disassembly Steps
- To remove the Battery:
- To remove the HDD:
- To remove the Optical Device:
- To remove the System Memory:
- To remove and install a Processor:
- To remove the VGA Card:
- To remove the 3G Module:
- To remove the Wireless LAN Module:
- To remove the Bluetooth Module:
- To remove the Inverter Board:
- To remove the Keyboard:
- To remove the Modem:
- 1. Remove the battery page 2 - 5
- 2. Remove the HDD page 2 - 6
- 3. Remove the Optical device page 2 - 8
- 4. Remove the system memory page 2 - 9
- 5. Remove the processor page 2 - 10
- 6. Remove the VGA Card page 2 - 13
- 7. Remove the 3G module page 2 - 14
- 8. Remove the WLAN module page 2 - 15
- 9. Remove the Bluetooth Module page 2 - 16
- 10. Remove the keyboard page 2 - 18
- 11. Remove the Modem page 2 - 19
- Removing the Battery
- Removing the Hard Disk Drive
- Removing the Optical (CD/DVD) Device
- Removing the System Memory (RAM)
- Removing and Installing a Processor
- Removing the VGA Card
- Removing the 3G Module
- Removing the Wireless LAN Module
- Removing the Bluetooth Module
- Removing the Inverter Board
- Removing the Keyboard
- Removing the Modem
- Appendix A: Part Lists
- Appendix B: Schematic Diagrams
- SYSTEM BLOCK DIAGRAM
- Penryn 1/2
- Penryn 2/2
- Cantiga 1/6, Host
- Cantiga 2/6, PEG
- Cantiga 3/6, DDR
- Cantiga 4/6, Power 1
- Cantiga 5/6, GND
- Cantiga 6/6, Power 2
- DDR3 SO-DIMM 1
- DDR3 SO-DIMM 2
- LCD
- ICH9-M 1/4, SATA
- ICH9-M 2/4, PCI, USB
- ICH9-M 3/4
- ICH9-M 4/4, Power
- ODD, USB2.0 & eSATA
- Clock Generator
- PCI-E LAN RTL8111C, RJ45RJ11
- Card Reader & 1394 JMB380
- New Card, CCD, Fan
- KBC-ITE IT8512
- HDMI, 3G
- LED, Screw Hole
- Azalia CODEC ALC662
- Audio AMP
- SRS, MDC, BT
- DVI, INV
- Power Charger, DC-In
- Power GPU
- Power 1.5V/0.75V
- Power 3.3VM/1.8VS/1.05VM
- Power 3VS/5VS / Power S/W
- Power VDD3/VDD5/3.3V/5V
- Power VCORE
- Mini Card/WLAN
- MXM PCI-E Type III
- Board to Board CON/TPM
- Button Board
- Click Board
- Finger Printer Board
- SIM Card Board