Solvline SG-3011PCL - Manual (Page 33)

SerialGate User Manual
33
Pin Number 0 1 2 3 4 5
Pin Name PB5 PB6 PB7 PB8 PB9 PB14
As shown above, let us assume that PB5 and PB6 are connected to each other. The value from
PB6 can be read from PB5 using the command below.
Since the output values of PB6, PB8, and PB14 are connected to PB5, PB7, and PB9
individually as shown in the figure from page 30, when the commands are entered from the
terminal, low from PB6, high from PB8, and low from PB14 are shown as below.
(When using TestView to enter the command, it will be show in the terminal screen, but the
returned value will be displayed as shown below.)
As shown above, the high value is shown with the value 1 and 0 for the low.
The next example is setting output for pin 1(PB6).