Solvline SG-3011PCL - Manual (Page 18)

SerialGate User Manual
18
Network Setting
After logged in, the ‘Network Setting’ page will be displayed. Every values in here except the MAC
address can be modified. The page is shown as below.
The ‘Network Setting’ display the operating environment for currently connected network. The ‘Submit’
button must be clicked in order to save the changes. To apply changed settings, the device must be
rebooted. If the submit button is not clicked to save the changed settings, when the device boot next
time, the changed value will not be applied.
The ‘Cancel’ button can be used to revert the settings back to the original state.
Information displayed in the ‘Network Setting’ page is show below.
Menu Default Description
Device Name SerialGate Displays the device name
MAC Address
(different among
each devices) Displays the MAC address
(cannot be modified)
Connection
Type
Static IP Can be selected between DHCP (Dynamic IP) or Static IP
IP Address 192.168.0.223
The IP address of the current device.
(If the ‘Connection Type’ is set to ‘Static IP’, enter the
value manually, but if it is set to ‘DHCP’ IP address cannot
be changed manually.)