Solvline SG-3011PCL - Manual (Page 31)

SerialGate User Manual
31
GPIO Configuration
This section covers an example of how to connect SG-3011PCL using TCP client mode and
setting GPIOs then read/write from them.
Assume that the users are using the GPIO pin as shown below. The PB5, PB7, and PB9 can be
used to retrieve the output value from PB6, PB8, and PB14.
PB5 PB6
PB7 PB8
PB9 PB14
Input Output
Install the TestView and run it. Select ‘Port’ from the menu, then click ‘TCP/UDP Port’.