Solvline SG-3011PCL User Manual
Page 16
SerialGate User Manual
16
If the SG-3011PCL cannot be found with the “Search” button or uses the different group of IP address,
try the instructions below to connect.
Default IP Address: 192.168.0.223
The IP address of the SG-3011PCL is set to 192.168.0.223 by default. Before the SerialGate is
installed in the place where it would operate, the users should first configure the settings that suits its
operating environment. However, if the PC have a different IP group, it may not be able to connect to
the SerialGate even if the users entered the default IP address. In this case, please establish a connect
to the SerialGate with the PC directly using the Ethernet cable and set the IP address of the PC to the
same group that the SerialGate is set to. It is recommended to set the IP address of the PC as shown
below when directly connected to the SerialGate.